WD10EARX-00N0YB0-00510053-WCC0T

thienminh6879
Bình luận: 0Lượt xem: 225

thienminh6879

Administrator
31_wdlogo-jpg.10061
>Family:................................. : Sadle 2D
>Techno mode key......................... : Ok
>
>HDD Status sector....................... : Ok
>
>RAM:
>System controller (SoC)................. : 88i9146B2 0x(7412)
>HDD Info reading........................ : Ok
>Heads number............................ : 3
>Cyl Count............................... : 256
>
>ROM:
>Read ROM................................ : Ok
>ROM Data size........................... : 256 Kb
>Flash ROM dir reading................... : Ok
>Flash ROM dir reading (Ext)............. : Ok (Active)
>Modules directory address............... : 382 437
>SA regions address...................... : by default
>SA regions address (RAM)................ : by default
>Module 02 access........................ : Granted
>
>SA SPT.................................. : 2005
>
>SA Translator loading................... : Ok
!SA defects assigned..................... : 4
>
>ROM Modules:
>ROM version............................. : 51.53A
>Module 4F F/W version................... : 00510053
>Overlay F/W version..................... : 51.54A
>Servo F/W version....................... : 0A.02
>
>Heads configuration..................... : by map
>Heads number............................ : 3
>Heads number in use..................... : 3
>Switched off heads...................... : No
>Heads map............................... : 0,1,2
>
>Relocations............................. : 0 (1 186)
>Read ROM DCM............................ : Ok
>
>Power up log reading.................... : Ok
>Power up load dir data.................. : Yes
>Power up load permovl................... : Yes
>Power up load CFG data.................. : Yes
>
>Service area:
>SA dir reading (ID)..................... : Ok
>Dir items loaded........................ : 439
>
>SA Access............................... : Copy 0,Copy 1
>
>Configuration reading................... : Ok
>CFG tech mode lock...................... : No
>Self encryption drive................... : No
>Master Password......................... : has not been set
>User Password........................... : has not been set
>
>DCM in module 47........................ : C7
>DCM in module 0A........................ : |T|AC74NGC
>DCM in module 02........................ : S|BTLAPAMCH7C4RNVGKSUM
>
 

Bạn hãy đăng nhập hoặc đăng ký để phản hồi tại đây nhé.

Bên trên